Flat Roofs in Shreveport, LA

Reliable Flat Roofing for Lasting Performance

A flat roof is never truly flat, and the small amount of slope it does have decides everything. Water that lingers longer than 48 hours after rain is ponding, and ponding is how membranes age early and seams begin to open. MRC Roofing installs, restores, and repairs low-slope roofing across Shreveport, LA for commercial buildings, additions, and modern residential designs.


With 30 years of combined experience behind our crews, we treat drainage as a design problem to solve rather than an afterthought to work around. Membrane selection, seam welding, flashing at curbs and parapets, and drain placement all get planned before a single roll of material reaches the roof. Whether your building needs a complete new system, a restoration coating that buys another decade of service, or a stubborn leak traced and sealed for good, start with a free inspection booked through our contact page.

Free Estimate!

For the fastest reply, text us at 318-455-6593

Contact Us

Our Flat Roofing Services

  • TPO Roofing Installation

    Heat-welded single-ply membrane creates continuous, watertight seams across the entire roof field with no exposed fasteners. Its reflective white surface pushes solar heat away, which measurably reduces cooling demand on buildings carrying large, unshaded roof areas.

  • Modified Bitumen Roofing

    Multi-ply asphalt-based systems deliver proven durability and strong resistance to foot traffic on roofs that see regular mechanical service access. Layered redundancy means a single surface breach does not immediately turn into an interior leak below.

  • Flat Roof Leak Repair

    Low-slope leaks hide well because water spreads laterally between the layers before it ever appears inside. We locate the actual breach through methodical inspection of seams, curbs, drains, and terminations, then repair it with fully compatible materials.

  • Drainage and Ponding Correction

    Standing water is a symptom rather than the underlying disease itself. Tapered insulation, additional drains, scupper adjustments, and cricket construction all redirect the runoff so the surface clears well within the drying window that manufacturers require for warranty coverage.

  • Flat Roof Coatings and Restoration

    Silicone and acrylic coating systems seal aging membranes, bridge minor seam separations, and restore the reflectivity that has weathered away. For roofs with sound insulation and dry decking underneath, a restoration delays full replacement substantially while adding genuinely warrantable years.

  • Commercial Flat Roof Replacement

    Full tear-offs on occupied buildings demand careful sequencing, protection, and constant communication with your team. We phase the work to keep operations running, maintain a watertight condition every night, and dispose of old material without blocking parking or entrances.

Why Proper Flat Roofing Prevents Water Problems

Space You Can Actually Use

Level surfaces accommodate HVAC equipment, solar arrays, and service platforms that a steep pitched roof simply cannot hold safely. That usable area very often decides the layout of everything else in a commercial building's entire mechanical and electrical design.

Faster, Less Disruptive Installation

Crews work efficiently on walkable surfaces without staging for pitch and rigging fall protection at every single step. Shorter project timelines mean fewer days of noise, heavy equipment on site, and restricted access around your building and its main entrances.

Simple Access for Maintenance

Inspecting and servicing a low-slope roof is straightforward and comparatively safe for everyone involved. Technicians reach rooftop units easily, and routine checks actually get done on schedule instead of being deferred because the access feels risky or complicated.

Reflective Surfaces Cut Cooling Costs

White membranes and coatings return a large share of solar energy back to the sky rather than pushing it into the building. On wide roof areas, that reduction shows up clearly in warm-season utility bills every year.

Room for Rooftop Equipment

Mechanical units, exhaust fans, and communication gear all sit securely on a level plane with properly flashed and sealed curbs. Expanding your equipment later becomes a matter of adding another curb rather than redesigning the roof around it.

Repairs That Stay Contained

Membrane systems are patched and heat welded locally, so damage in one area does not require touching the rest of the field. Isolated fixes restore full watertight integrity quickly and at a predictable, modest cost to the building owner.

Testimonials


See What Our Customers Are Saying!

Keep Your Flat Roof Performing Its Best

Low-slope roofing rewards attention to details nobody notices until they fail: the pitch toward a drain, the weld at a seam, the flashing wrapped around a curb. Get those right and a flat roof performs quietly for decades. Get them wrong and the building tells you within two rainy seasons. MRC Roofing brings that focus to every commercial and residential low-slope project in Shreveport, LA, from new TPO installations to restoration coatings and targeted leak repairs. Free inspections mean you can understand your roof's condition before deciding anything. Get in touch through our contact page and we will take a close look.

Frequently Asked Questions

  • How long does a flat roof last?

    TPO and modified bitumen systems generally run 20 to 30 years with proper installation and consistent upkeep. Drainage quality, the volume of foot traffic, and how promptly small failures get addressed all move that number significantly either way.

  • Is standing water on a flat roof normal?

    Some pooling right after heavy rain is expected, but water remaining beyond 48 hours counts as ponding. Persistent ponding degrades membranes, strains the structure below, and voids most manufacturer warranties, so it deserves prompt correction rather than patience.

  • How often should a low-slope roof be inspected?

    Twice yearly, plus a check after any major storm event. Low-slope systems hide their problems far better than pitched roofs do, and debris around drains can turn a functioning surface into a standing pond within a single heavy season.

  • What causes most flat roof leaks?

    Seam separation, failed flashing at curbs and parapets, clogged or undersized drains, and punctures from foot traffic or dropped tools. Terminations and penetrations together account for far more membrane failures than the wide open field of the roof ever does.

  • Can a flat roof be coated instead of replaced?

    Often yes, when the insulation and decking underneath remain dry and the membrane itself is structurally sound. A coating restoration adds genuinely warrantable years for considerably less than a full tear-off and complete system replacement would ever cost.

  • Which membrane is better, TPO or modified bitumen?

    TPO offers reflectivity and welded seams that suit large, exposed roof areas particularly well. Modified bitumen handles regular foot traffic and complex details better. MRC Roofing helps Shreveport, Louisiana building owners weigh both options honestly against their use.

  • Do flat roofs work on residential homes?

    Yes, particularly on additions, porches, and modern architectural designs where the look is intentional. The requirements are identical to commercial work: correct slope toward the drains, fully welded or sealed seams, and properly flashed edges, curbs, and penetrations.

  • How disruptive is a commercial flat roof replacement?

    Less than most owners expect going into it. MRC Roofing phases the work carefully and deliberately so the building stays watertight every night and the entrances stay open, applying 30 years of combined experience to commercial projects throughout Shreveport, Louisiana.